Pressure swing adsorption air separation equipment
Membrane separation air separation series
Oil field special air separation equipment series
Pressure swing adsorption special gas Generator series
Purification of VCM waste gas by pressure swing adsorption
The technology for coke oven gas purification
The technology of Purification CO2 by PSA
The technology of Purification CO by PSA
The technology of Purification natural gas by PSA
The technology for Decarburizations through PSA
The technical of Purification of hydrogen by pressure swing adsorption
Compressed air purification equipment series
Freeze drying machine
No heat regenerative adsorption dryer
Micro heat regeneration dryer
Micro heat regeneration compressed air dryer
Compression blower heat zero gas consumption drier
Zero gas consumption isobaric adsorption dryer
Combined low dew point drier
High efficient oil remover
High efficiency oil-water separator
CJF Type Precision Air Filter
CDF Type Dust Fine Air Filter
CLT Type Activated Carbon Air Filter
Antibacterial Air Filter
High efficiency gas cooler
Dew point detector
Skid-mounted
TGW The no heat regenerative dryer is a kind of equipment for drying compressed air according to the principle of pressure swing adsorption. It absorbs water in compressed air under the condition of pressure, so that compressed air can be dried. When decompression, a part of dry compressed air is used to purge adsorbent, so that the adsorbent can be regenerated. The two towers alternate and recycle. Dry compressed air is obtained. According to the different dew point of compressed air at atmospheric pressure, different adsorbents are selected, commonly used adsorbents are activated alumina, molecular sieve, etc.
Working principle:
TGW The no heat regenerative dryer is a kind of equipment for drying compressed air according to the principle of pressure swing adsorption. It absorbs water in compressed air under the condition of pressure, so that compressed air can be dried. When decompression, a part of dry compressed air is used to purge adsorbent, so that the adsorbent can be regenerated. The two towers alternate and recycle. Dry compressed air is obtained. According to the different dew point of compressed air at atmospheric pressure, different adsorbents are selected, commonly used adsorbents are activated alumina, molecular sieve, etc.
Features:
The special gas distributor ensures the uniform distribution of air flow, makes the compressed air and adsorbent fully in contact, and prevents the "dead angle" and "tunnel effect" of adsorption.
Automatic pressure settings,Equalizing process,To reduce the flow of adsorbent impact。
Flanged filling port and discharge port,Easy to replace desiccant。
Scientific speed design, high quality adsorbent selection ensure the stability of finished gas dew point.
Adopts Germany Siemens PLC controller,LCD, Humanization design,light touching the key operate,The working regeneration time can be adjusted according to the working conditions.
Drying and regeneration status display
Control the air source from the adsorption tower outlet dry air, to avoid oil and water pollution control valve and gas path, prevent valve rust and gas path blockage.
High Quality control components,Ensure long term reliable operation of equipmen
Working pressure:0.6~1.0MPa(according to user's request can provide 1.0~3.0MPa)
Inlet temperature:≤ 45℃
Atmospheric dew point :≤一40℃~(alumina),≤一60℃~(molecular sieve)
Regenerated gas consumption:≤12%
Working power :220V/50Hz