Pressure swing adsorption air separation equipment
Membrane separation air separation series
Oil field special air separation equipment series
Pressure swing adsorption special gas Generator series
Purification of VCM waste gas by pressure swing adsorption
The technology for coke oven gas purification
The technology of Purification CO2 by PSA
The technology of Purification CO by PSA
The technology of Purification natural gas by PSA
The technology for Decarburizations through PSA
The technical of Purification of hydrogen by pressure swing adsorption
Compressed air purification equipment series
Freeze drying machine
No heat regenerative adsorption dryer
Micro heat regeneration dryer
Micro heat regeneration compressed air dryer
Compression blower heat zero gas consumption drier
Zero gas consumption isobaric adsorption dryer
Combined low dew point drier
High efficient oil remover
High efficiency oil-water separator
CJF Type Precision Air Filter
CDF Type Dust Fine Air Filter
CLT Type Activated Carbon Air Filter
Antibacterial Air Filter
High efficiency gas cooler
Dew point detector
Skid-mounted
After the mixed air containing carbon dioxide (CO2) enters the pressure swing adsorption (PSA) device adsorption tower, the adsorption capacity of the adsorbent in the adsorption bed is different with the change of pressure. CO2 in the raw gas is absorbed under pressure, and the components that are not easy to be absorbed are removed from the outlet of the adsorption bed. When decompression occurs, the adsorbed CO2 and residual impurities are desorbed and desorbed. The concentrated CO2 is refined, and one part returns to the PSA system and the other part is canned in the form of liquid products。
Working principle:
After the mixed air containing carbon dioxide (CO2) enters the pressure swing adsorption (PSA) device adsorption tower, the adsorption capacity of the adsorbent in the adsorption bed is different with the change of pressure. CO2 in the raw gas is absorbed under pressure, and the components that are not easy to be absorbed are removed from the outlet of the adsorption bed. When decompression occurs, the adsorbed CO2 and residual impurities are desorbed and desorbed. The concentrated CO2 is refined, and one part returns to the PSA system and the other part is canned in the form of liquid products。
Feed gas:
Fermentation gas、Conversion gas、Decarburization and regeneration gas
Mine Gas
Other mixed gases containing CO2
Control mode and characteristics:
Control mode: The SPA device is controlled by the controller and meter. The controller can select DCS, FCS and PLC control system according to the scale and control requirements of the SPA device。
Characteristics: It not only realizes the conventional control of the system, but also realizes the expert control and adaptive optimization control of arbitrary combination and switching of multiple towers, which not only improves the operational flexibility of the device, but also ensures the long-term, stable and safe operation of the PSA device。
Service:
Provide patents and proprietary technology, provide the design for complete equipment
provide general contracting of equipment
Provide technical service and personnel training during installation and commissioning of the equipment
After acceptance, the warranty period for one year
Long-term provision of spare parts, spare parts
Raw material: Mixed gases containing CO2
Pressure: Normal pressure ~0.6MPa(Adjustable)
Normal temperature
Output products: Pure CO2
CO2 Purity: 99~99.999%(v),According to user's different usage and request production。
The quality of CO2 products meets national food grade CO2 standards
Note: CO2 recovery rate is related to raw material composition, pressure and CO2 purity。