Pressure swing adsorption air separation equipment
Membrane separation air separation series
Oil field special air separation equipment series
Pressure swing adsorption special gas Generator series
Purification of VCM waste gas by pressure swing adsorption
The technology for coke oven gas purification
The technology of Purification CO2 by PSA
The technology of Purification CO by PSA
The technology of Purification natural gas by PSA
The technology for Decarburizations through PSA
The technical of Purification of hydrogen by pressure swing adsorption
Compressed air purification equipment series
Freeze drying machine
No heat regenerative adsorption dryer
Micro heat regeneration dryer
Micro heat regeneration compressed air dryer
Compression blower heat zero gas consumption drier
Zero gas consumption isobaric adsorption dryer
Combined low dew point drier
High efficient oil remover
High efficiency oil-water separator
CJF Type Precision Air Filter
CDF Type Dust Fine Air Filter
CLT Type Activated Carbon Air Filter
Antibacterial Air Filter
High efficiency gas cooler
Dew point detector
Skid-mounted
When the feed gas Enter the PSA machine, as the adsorption capacity of adsorbent on carbon dioxide (CO2) in the adsorption bed varies with the pressure, CO2 in the raw gas is absorbed under pressure, and it is not easy to absorb components -- hydrogen H2 and nitrogen N2 from the outlet of the adsorption bed as purification gas output. During decompression and evacuation, the impurity components such as CO2 absorbed are desorbed from the adsorbent, and the adsorbent is regenerated.。 According to the specific requirements of users, different processes can be used to decarbonizes and recycle high purity CO2
Working principle:
When the feed gas Enter the PSA machine, as the adsorption capacity of adsorbent on carbon dioxide (CO2) in the adsorption bed varies with the pressure, CO2 in the raw gas is absorbed under pressure, and it is not easy to absorb components -- hydrogen H2 and nitrogen N2 from the outlet of the adsorption bed as purification gas output. During decompression and evacuation, the impurity components such as CO2 absorbed are desorbed from the adsorbent, and the adsorbent is regenerated。
According to the specific requirements of users, different processes can be used to decarbonizes and recycle high purity CO2。
Feed gas:
Conversion gas
Others need to remove CO2 gas
Control mode and characteristics:
Control mode: The SPA device is controlled by the controller and meter. The controller can select DCS, FCS and PLC control system according to the scale and control requirements of the SPA device。
Characteristics: It not only realizes the conventional control of the system, but also realizes the expert control and adaptive optimization control of arbitrary combination and switching of multiple towers, which not only improves the operational flexibility of the device, but also ensures the long-term, stable and safe operation of the PSA device。
Service:
Provide patents and proprietary technology, provide the design for complete equipment
Provide general contracting of equipment
Provide technical service and personnel training during installation and commissioning of the equipment
After acceptance, the warranty period for one year
Long-term provision of spare parts, spare parts
Feed gas:
Pressure: 0.6~3.5MPa(Adjustable)
Temperature:Normal temperature
Product output: Purified air
H2 recovery rate: >99.5%
CO2 content: ≤0.2%(v)
Output pressure: 0.1mpa lower than raw material pressure
Output temperature: Room temperature ~ 40 ℃
By product: desorption gas
CO2 content: 75~99.5%(v)
Output pressure: Normal pressure~20KPa
Output temperature: Room temperature